Y1 tutorial is one of the most popular topics among surveyors, geomatics engineers, and professional GPS users.
The Y1 multi-frequency receiver has gained a special position among surveying equipment due to its utilization of the latest satellite technologies, very high accuracy, powerful processing speed, and dedicated software. This receiver not only supports multi-constellation systems such as GPS, GLONASS, BeiDou, and QZSS, but also serves as a complete package for various land and geodetic projects, featuring a LoRa radio with anti-jamming capabilities and the smart SingularSurv software.

⌈ Note: The software tutorial videos are available at the end of this page. ⌋

In recent years, with the increasing use of advanced multi-frequency receivers, the need to learn precise settings and how to set up this equipment is felt more than ever. Therefore, the Y1 tutorial serves as a comprehensive resource, paving the way for both novice users and professional experts to utilize the full capacity of this device.

In this article, you will become familiar with the SingularSurv software environment step-by-step, learn how to configure initial settings and connect the device, and finally be able to perform surveying and stakeout operations with high accuracy. This tutorial is designed in such a way that after reading it and watching the related training videos, you can work independently with the Y1 receiver; from setup and tilt sensor calibration to project storage, checking signal quality, and configuring radio communication settings.

In short, the goal of this article is to ensure that after reading it, you will no longer need to search for scattered tutorials and will learn everything about the Y1 software, hardware, and technical points all in one place.

==> Click here to download this software and other applications.

🎯 Introduction to the Y1 Multi-Frequency Receiver

The Y1 receiver is the only GPS on the market offered in two versions: LoRa radio and multi-protocol radio, each serving specific applications:

⭐ SingularSurv Software | The Strength of Y1

The manufacturer (SingularXYZ) has designed the powerful SingularSurv software specifically for the Android operating system to accompany the Y1 multi-frequency receiver.

📌 With the Y1 and dedicated SingularSurv software tutorial, you can fully master the performance of your receiver and take advantage of all its capabilities, including:

🔹 Performing Point, Line, and Area Surveying

In SingularSurv software, you can perform surveying operations with centimeter-level accuracy in different modes. This software allows for point surveying (Point Survey), continuous lines for paths (Line Survey), and closed areas for calculation (Area Survey). With the help of multi-constellation data and the precise tilt sensor, you can conduct quick and accurate surveys even on sloped and uneven terrains.

🔹 Base and Rover Settings

One of the important parts of the Y1 training is learning how to set up the Base and Rover. In SingularSurv software, with just a few simple taps, you can activate the Base device, input the reference coordinates, and then connect the Rover to the Base. Y1 supports both radio (LoRa) and internet (NTRIP) communications, allowing you to establish a stable connection between devices under any conditions. In this part of the tutorial, you will learn how to properly configure the radio frequency, correction address, and RTCM parameters to achieve the highest accuracy in your survey.

🔹 Managing RTK Projects

In the professional environment of SingularSurv software, users can manage multiple projects simultaneously. In the Y1 tutorial section, creating new projects, naming them, defining the Coordinate System, and managing saved files are explained. You can view RTK results live, checking the signal status, real-time accuracy, and the fix percentage of the data. This feature ensures that your projects are always organized, traceable, and standardized.

🔹 Bluetooth and Radio Connection

The Y1 receiver supports two main types of communication: Bluetooth and Radio (LoRa / Multi-Protocol). In the Y1 software tutorial, you will learn how to connect your Android mobile phone to the receiver via Bluetooth and, if necessary, transfer data via radio. The Y1 Bluetooth is designed with high range and excellent stability so that in field projects, you can establish a reliable connection between the device and the software even without cables. If using LoRa radio, the tutorial also covers channel selection, signal power configuration, and checking the link status between the Base and Rover.

🔹 Adjusting Slope and Tilt in Surveys

One of the unique features of the Y1 receiver is its IMU tilt sensor up to a 60-degree angle with 2.5 cm accuracy. In this section of the Y1 tutorial, you will learn how to activate the tilt sensor, calibrate it, and use the pole-free leveling feature for accurate surveying in conditions where quick measurement is needed (such as areas with obstacles or points without direct line of sight). This feature allows you to perform surveying operations without losing accuracy, even in harsh and obstructed environments.

🔹 Exporting and Transferring Data

At the end of each project, you can save and transfer the survey results in various formats such as CSV, TXT, or DXF. In the Y1 tutorial, configuring the storage path, naming files, and exporting data for drafting software like AutoCAD and Civil 3D are fully covered. This capability allows the surveyed data to be easily used in CAD or GIS systems.

✅ By mastering these sections, you will be able to manage all surveying operations solely through your mobile phone and make the most of the advanced, precise, and fast features of the Y1. All Y1 training videos in this section are provided by the training team of Fadak Ground Equipment Technology Company to help you learn how to use it from scratch to advanced levels.

📡 Technical Specifications of the Y1 Receiver

📌 This receiver alone meets all the needs of professional surveyors.

∴ Purchase the Y1 multi-frequency receiver from the Fadak store at the best price.

🎥 Y1 Tutorial and Getting Started with the Device

In the video section of the Y1 tutorial, all stages of working with the device are shown practically so that you can act with confidence in the real project environment.
==> In these tutorials, turning on the receiver and connecting it to SingularSurv software, performing initial Base and Rover settings, analyzing active satellites and received signal quality, as well as executing precise surveying using the IMU and tilt sensor are explained step-by-step.
Finally, the method of saving data and exporting standard outputs for drafting software is taught, allowing you to run your projects independently without needing a technician or technical support after watching the videos. Execute your projects independently, without needing a technician or technical support.

Why Is the Y1 Tutorial Important?

The Y1 multi-frequency receiver is part of the newest generation of precise and smart GPS systems, which performs completely differently compared to older receivers due to its multi-constellation systems and anti-noise and anti-jamming technologies. Consequently, learning and mastering how to use it through the Y1 tutorial is essential for any professional surveyor.

However, the importance of the Y1 tutorial does not end with the initial setup. Below, we examine several key reasons 👇

1. Increasing the Accuracy and Speed of Data Collection

Using the Y1 tutorial, the user learns how to significantly reduce survey errors by properly activating the 60-degree IMU tilt sensor and utilizing multi-source satellite data (GPS, GLONASS, BDS, etc.). In sensitive projects like urban cadastre or pipeline surveying, even a 1 cm height difference matters. As a result, mastering the settings and calibration of the device leads to faster, more accurate surveying without the need to repeat operations.

2. Utilizing Anti-Jamming Technology in Difficult Environments

One of the prominent features of the Y1 receiver is its support for LoRa radio with anti-jamming capability and a range of up to 15 km. However, without proper training, many users do not know how to activate or optimize this feature. Through the Y1 tutorial, you will learn to configure the appropriate radio parameters in areas with signal interference, such as industrial workshops, mines, or crowded urban environments, to utilize the best signal quality. This ensures uninterrupted and stable surveying even in the most difficult field conditions.

3. Greater Compatibility and Integration with Other Brands

The Y1 receiver is one of the few devices that supports two types of radios (LoRa and multi-protocol). With proper training, the device can be easily integrated as a Base and Rover with receivers from different brands. This capability is highly important for teams that own several different GPS brands, saving them the cost of buying new equipment. The Y1 tutorial teaches you how to configure communication settings so that you face no limitations in communication between receivers in combined projects.

4. Reducing Costs and Increasing Productivity

In many companies, the lack of sufficient knowledge in device settings causes users to make repetitive mistakes in projects, requiring the dispatch of technical experts. By completing the Y1 receiver training, novice operators can also reach a professional level in a short time and carry out operations without relying on a technical expert. This not only reduces extra costs but also saves time and increases the speed of project execution.

In short, the Y1 tutorial helps you utilize all the hardware and software capabilities of the device and achieve maximum efficiency in your surveying projects.

Conclusion | Final Summary of the Y1 Tutorial

The Y1 multi-frequency receiver, combining advanced technologies, dedicated SingularSurv software, and a rugged design, is considered one of the most complete pieces of surveying equipment in the Iranian market. However, utilizing all its capacities is not possible without the Y1 tutorial.

During the Y1 training course, you will become familiar with all sections of the device’s software and hardware; from initial connection and Bluetooth settings to Base and Rover setup, working with the IMU, tilt surveying, and how to save and export data.

By mastering these steps, you can:

• ✅ Execute large surveying projects in less time and with higher accuracy.

• ✅ Use anti-jamming technologies and LoRa radio for better and more stable coverage.
  

• ✅ Communicate with all other GPS brands and build wider RTK networks.
  

• ✅ Deliver surveyed data with centimeter accuracy and without the need for lengthy processing.`

In fact, the Y1 tutorial is not just a simple learning course; it is the key to mastering one of the most powerful multi-frequency receivers in the world. By mastering it, you not only upgrade your device performance but also elevate the output quality of your surveying projects to international standards.

If you are at the beginning of working with the Y1 GPS, it is recommended to watch all the training videos in this section in order, and then complete your skills by practicing in the real environment. The final result for you will be nothing but high accuracy, cost savings, and increased project execution speed.

♦ View various GNSS receivers with the best price and product warranty ♦