Introduction
The SHARE SLAM S20 SE and S20 SE RTK laser scanners represent the new generation of mobile 3D scanners from the SHARE brand. They have been designed with a highly focused approach to meet the needs of the AEC industry (Architecture, Engineering, and Construction). This collection is considered the economical yet professional version of the S20 family and has been developed specifically for civil engineers, architects, contractors, interior designers, engineering firms, and project oversight teams.
In Iran, this product is offered by Fadak Company as the official representative of SHARE, where customers can benefit from a valid warranty, specialized support, comprehensive training, and professional after-sales services.
Why is the SHARE SLAM S20 SE Laser Scanner the Best Option for AEC?
By conducting a precise analysis of the global SLAM scanner market, SHARE realized that most users in the AEC industry have the following needs:
- The need for rapid, lightweight, and precise scanning without extra complexity
- No need for extremely heavy cameras or advanced RTK in many projects
- Focus on indoor scanning and structural documentation
- Need for an economical device with professional performance
- Long battery life for multi-hour projects
By analyzing these exact needs, the S20 SE model was designed. The goals for this model were:
- Cost reduction
- Weight reduction
- Increased operational speed
- Increased battery life
- Providing precise output for AEC requirements
The result of this mindset is a product that is currently one of the most widely used SLAM scanners in architectural and civil engineering projects.
Main Features of the SHARE SLAM S20 SE Laser Scanner
Below are the technical and specialized features of this laser scanner in full detail:
1. Ultra-Lightweight Design – 200g Lighter than the SHARE S20
With its new design, the SHARE SLAM S20 SE laser scanner is approximately 200g lighter than the S20 model. This weight reduction results in:
- Very easy one-handed carrying
- The operator can scan for several hours without fatigue
- Excellent performance in small spaces such as stairwells, elevator shafts, dropped ceilings, small storerooms, and attics
=> This weight reduction has a direct impact on the quality and speed of operations and is one of the reasons for the S20 SE model’s popularity.
2. Powerful 180-Minute Battery – Suitable for Large Projects
Long battery life is one of the key differences between the SHARE SLAM S20 SE and other scanners on the market. This model provides up to 180 minutes of continuous operation with just one battery.
This feature is essential for AEC projects:
- Possibility to scan multiple floors without stopping
- Suitable for large indoor environments
- Ideal for daily construction monitoring
- Suitable for industrial and civil projects
3. Global Shutter Camera – Distortion-Free and Precise Images
One of the main technical advantages of the SHARE SLAM S20 SE is the use of a Global Shutter camera. The benefits of this technology include:
- Elimination of motion distortion
- Precise color recording in all lighting conditions
- Consistent and stable quality in both low and high light
- Suitable for Realistic 3D modeling
- 1.9mm focal length for scanning tight spaces
- Image capture speed: 0.1 seconds between each photo
This speed is 3 to 5 times faster than previous models and makes Point Cloud colorization extremely precise.
4. Advanced S20 SE RTK Version
For users who need precise location coordinates, the S20 SE RTK model is offered:
- Internal RTK
- Horizontal accuracy: 0.8cm + 1ppm
- Vertical accuracy: 1.5cm + 1ppm
- Specific to outdoor environments
- Suitable for surveying and coordinate mapping projects
This version is the best option for engineers who require geodetic coordinates.
5. 1cm Point Cloud Accuracy – Global AEC Standard
By conducting a precise analysis of the global SLAM scanner market, SHARE realized that most users in the AEC industry have the following needs:
- The need for rapid, lightweight, and precise scanning without extra complexity
- No need for extremely heavy cameras or advanced RTK in many projects
- Focus on indoor scanning and structural documentation
- Need for an economical device with professional performance
- Long battery life for multi-hour projects
By analyzing these exact needs, the S20 SE model was designed. The goals for this model were:
- Cost reduction
- Weight reduction
- Increased operational speed
- Increased battery life
- Providing precise output for AEC requirements
The result of this mindset is a product that is currently one of the most widely used SLAM scanners in architectural and civil engineering projects.
6. Professional Color + Intensity Output
This model supports all standard formats required by professionals:
- Original photos
- Distortion-corrected photos
- Colored Point Cloud
- Intensity Point Cloud
- Trajectory file
These outputs are fully compatible with software such as Revit, Navisworks, 3DGS, ShareStudio, and CloudCompare.
7. Full Compatibility with the SHARE 3DGS Processing Engine
3DGS is one of the most powerful 3D reconstruction systems in the world.
∴ Benefits:
- Production of highly realistic digital models
- Noise reduction
- Intelligent trajectory processing
- Precise and natural colorization
=> The SHARE SLAM S20 SE laser scanner has been optimized to work with this technology.
Applications of the SHARE SLAM S20 SE Laser Scanner
- Architecture and building documentation
- Indoor building surveying
- Monitoring civil engineering projects
- BIM modeling
- Interior design
- Mapping tight and complex spaces
- Calculating surface, volume, and dimensions
- Monitoring construction progress
- As-built documentation
- Industrial and warehouse applications
Competitive Advantages of the SHARE SLAM S20 SE Over Other Models
- More affordable than the S20
- Significantly lighter
- Longer battery life
- No need for additional equipment
- Accurate output tailored to AEC requirements
- Ultra-fast image capture (0.1s)
- Full compatibility with 3DGS
- Stable performance in indoor projects
=> This model is the best option for civil teams, designers, and contractors who need a lightweight yet precise laser scanner.
Final Conclusion: Why is the SHARE SLAM S20 SE Laser Scanner the Best Choice for AEC?
The SHARE SLAM S20 SE laser scanner and its more advanced version, the S20 SE RTK, as the new generation of mobile scanners from the SHARE brand, are exactly the answer to the real needs of engineers, architects, supervisors, contractors, and AEC industry professionals. With its lightweight design, very powerful battery, Global Shutter camera, 1cm accuracy, and full compatibility with the 3DGS processing engine, it has become one of the most practical SLAM scanners for indoor environments and construction projects.
S20 SE is an economical yet professional version that has created high value by removing features unnecessary for AEC (such as very heavy cameras) and focusing on speed, efficiency, accuracy, and lightness. If your projects require precise outdoor coordinate mapping, the S20 SE RTK version will be a more complete choice.
Since this product is provided in Iran by Fadak Equipment Store, the official representative of SHARE, you can benefit from product authenticity, a valid warranty, specialized support, and comprehensive training; a factor that multiplies its value.
| Feature | S20 SE | S20 SE RTK | S20 |
|---|---|---|---|
| Weight | 955g | 1002g | 1079g |
| Battery | 180 min | 150 min | 150 min |
| Camera Pixels | 2.3MP ×2 | 2.3MP ×2 | 16MP ×2 |
| Sensor | 1/2.6″ | 1/2.6″ | 1″ |
| Capture Speed | 0.1s | 0.1s | 0.3–0.5s |
| Shutter Type | Electronic Global | Electronic Global | Mechanical + Electronic |
| Focal Length | 1.9mm | 1.9mm | 3.5mm |
| RTK | ❌ No | ✔ Yes | ✔ Yes (Stronger) |
🔍 Choose with Confidence, Buy Professionally
Before purchasing this laser scanner, we recommend reading our comprehensive guide so that you become familiar with model differences, applications, and important tips for choosing a 3D laser scanner.
Frequently Asked Questions (FAQ) — SHARE SLAM S20 SE Laser Scanner
1. Is the SHARE SLAM S20 SE suitable for outdoor use?
Yes, but for open spaces and where precise coordinates are needed, the S20 SE RTK version is recommended.
2. Is the S20 SE accuracy similar to the original S20 model?
Yes. Both models offer 1cm accuracy in the point cloud and are ideal for AEC.
3. Is S20 SE suitable for BIM?
Absolutely. Its output is highly suitable for Revit, Navisworks, ArchiCAD, Tekla, and other BIM software.
4. Does S20 SE work with Share Studio software?
Yes – it is 100% compatible and creates superb reconstruction quality with the 3DGS engine.
5. How much lighter is S20 SE than the original S20?
It is about 200 grams lighter, which greatly reduces operator fatigue in long projects.
6. Does this model have Point Cloud colorization capability?
Yes. Using a Global Shutter camera, it provides highly precise, distortion-free color output.
7. What is the scan and photography time?
Photography is performed at a speed of 0.1 seconds per image, which is much faster than a standard S20.
8. How long does the S20 SE battery last?
The battery of this model supports up to 180 minutes of continuous real-world operation.
9. What is the difference between S20 SE and S20 SE RTK?
The RTK version features internal RTK, centimeter-level coordinate accuracy, and is suitable for outdoor and large projects.
10. Does the scanner need periodic calibration?
Yes; like all SLAM devices, periodic calibration is recommended
(Fadak Company provides this service).
11. Is S20 SE suitable for mapping narrow spaces?
Yes, due to the 1.9mm lens and light weight, it is perfectly ideal for tight spaces like elevator shafts, attics, dropped ceilings, and stairwells.
12. Is it possible to export raw data and photos?
Yes. This device provides the following outputs:
Original photo
Distortion-corrected photo
Colored Point Cloud
Intensity Point Cloud
Trajectory
13. Is this device waterproof or dustproof?
It has a protection standard, but for extremely humid environments and heavy dust conditions, specialized models are suggested.
14. Is training provided for learning to use the device?
Yes. Fadak Company provides comprehensive training on scanning, processing, and Share Studio software.
15. Does the device have a demo option before purchase?
Yes. It is possible to see sample outputs and perform a demo in-person or on actual projects.
Introduction to Other SHARE Laser Scanners:
The SHARE SLAM S20 SE laser scanner is a suitable option for rapid 3D data acquisition and surveying projects. To compare this model with other devices, visit the laser scanner category page.
