ORION ONE GNSS RECEIVER
Receive signals from all satellite systems
One of the best and most popular receivers among surveyors is the Y1 receiver. With 1598 channels to track the entire satellite system, this receiver can provide high-precision positioning in the centimeter range. With its special tracking technology, satellite signals and advanced algorithm, the Y1 can be easily used in challenging environments and with the repeatability of the values provided, it will gain your complete trust.
OLED display
Y1 has an OLED display: Y1 has an OLED display that allows you to adjust general settings or static mode without using the controller with the capacitive buttons on the panel. It also shows you the receiver’s performance at any time.
WebUI:
از دیگر قابلیتهای Y1 میتوان به WebUI اشاره کرد که از طریق Wi-Fi به آن متصل شده و کلیه بروزرسانیهای نرمافزار و سایر تنظیمات را انجام میدهید.
6600 mAh batteries
Hot Swap Batteries: High-capacity 6600mAh hot swap batteries support over 12 hours of operation and less than 3 hours of charging time.
Flexible communications
With the integration of 4G, UHF, WiFi, Bluetooth, USB and serial port: With the integration of 4G, UHF, WiFi, Bluetooth, USB and serial port, you can flexibly choose the communication method you need. The 2W amplified UHF allows communication up to 15km, without the need for an external radio and reducing the burden on your equipment.
Field software
SingularSurv and SingularPad: Both SingularSurv and SingularPad are Android-based field surveying software that offer different surveying modes such as static, RTK, and PPK. These softwares support Base and Rover working modes, provide a variety of formats, have a simple and smooth user interface, and provide users with professional surveying methods.
Flexible communications
By integrating 4G, UHF, WiFi, Bluetooth, USB and serial port technologies:
By integrating 4G, UHF, WiFi, Bluetooth, USB and serial port technologies, you can flexibly choose the communication method you need. The 2W amplified UHF enables communication up to 15km working range, without the need for an external radio and reducing the burden on equipment.
Satellite tracking
Channels: 1598
GPS: L1, L1CA, L2 (L2P, L2c), L5, L1c
BDS: B1, B2, B3(B1I, B2I, B3I), (B1c, B2a, B2b)
GLONASS: L1 (L1CA, L1P), L2 (L2CA, L2P), L3
Galileo: E1, E5a, E5b, E6, E5 AltBoc
QZSS: L1C, L2, L5, L1C/A
Navic: L5
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
Accuracy
RTK reliability: ＞99.99%
RTK initialization: < 10s
Hot start: < 10s
Cold start: < 50s
Re-acquisition time: < 1s
Static post-processing:
– 2.5mm+0.5ppm Horizontally
– 5mm+0.5ppm Vertically
RTK:
– 8mm+1ppm Horizontally
– 15mm+1ppm Vertically
RTD:
– 0.5 m Horizontally
– 1.0m Vertically
Code differential:
– 0.25m+1ppm Horizontally
– 0.5m+1ppm Vertically
High precision long observation static accuracy:- 3mm+0.1ppm Horizontally
– 3.5mm+0.4ppm Vertically
Real time network accuracy:
– 8mm+0.5ppm Horizontally
– 15mm+0.5ppm Vertically
SBAS: < 1.0 m 3D RMS
Tilt surveying: <2.5cm, within 60° tilt
Communications
BT: BT4.0
Wi-Fi: IEEE 802.11 a/b/g/n 2.4G 5G, support configuration & data download via web UI
4G: FDD-LTE B1/B3/B5/B7/B8
TDD-LTE B38/B39/B40/B41
TDSCDMA B34/B39
WCDMA B1/B2/B5/B8
GSM B2/B3/B5/B8
CDMA1x/CDMA2000 BC0/BC1
UHF modem:
– Frequency range: 410 – 470Mhz
– Channel Spacing: 12.5 kHz
– Transmit power: 0.5W/1W/2W selectable
– Working range: Up to 15km with optimal conditions
Interface:
– 1 7-pin lemo port for RS232 transmission and power supply
– 1 SIM card slot for 4G
– 1 TNC connector for UHF antenna
Voltage
Power: 6-28V DC
Battery: 6600mAh, 3.6V, more than 12 hours working time
Power consumption: < 2.85 W*
Environmental conditions
Working temperature: -30℃ ~ + 65℃
Storage temperature: -40℃ ~ +85℃
Waterproof & dustproof: IP67
Shock and Vibration: Designed to survive a 2m drop onto concrete
Humidity: 100% no condensation
Vibration: MIL 810G
Body
Size: 12.3 × 12.3 × 7.0cm
Weight: 834 g, with batteries inside
Memory: 8 GB
Display: 0.93″ OLED display
Button: 2 buttons for power/enter and function
Indicator: 2 LEDs indicating satellite tracking and correction data
Housing: Magnesium-aluminum alloy
Speaker: For voice broadcast of real-time status
Data format
Data recording formats: RINEX 2.X, 3.X, binary data
Correction data formats: RTCM 2.x, 3.x, CMR, CMR+ (CMR & CMR+ for GPS only)
Data output formats: NMEA-0183 messages, binary data
Data output rate: 1Hz, 2Hz, 5Hz, 10Hz, 20Hz
Supported protocols: VRS, FKP, MAC, Ntrip
Visual Stakeout with Camera
Orion ONE’s 2MP starlight-grade camera offers intuitive visual stakeout, supporting centimeter-level AR guidance with a 75° field of view for accurate results, even in low-light conditions.
Visual Stakeout with Camera
Orion ONE’s 2MP starlight-grade camera offers intuitive visual stakeout, supporting centimeter-level AR guidance with a 75° field of view for accurate results, even in low-light conditions.
Non-Contact Laser Survey
Equipped with a laser module, Orion ONE provides centimeter-level accurate non-contact laser survey within 10m range, enhancing the surveyor’s capabilities in complex terrains.
60° Tilt Surveying
With a high-performance IMU, Orion ONE supports up to 60° tilt range for both pole surveying and laser surveying, greatly increasing survey efficiency and possibility.
More Possible Scenarios
Orion ONE’s non-contact laser survey simplifies surveying in areas where traditional methods fall short. It excels in environments with signal blockages, hard-to-reach locations, high-effort spots or hazardous conditions, providing safer, more efficient results.
Versatile Transmission
With integrated NFC, Bluetooth, WiFi, USB Type-C and 8GB onboard storage, Orion ONE offers versatile connectivity options, making data transfer and device management effortless.
IP67 Rugged Protection
Built to withstand harsh environments, the IP67-rated casing of Orion ONE provides protection against water, dust, and accidental drops, ensuring uninterrupted performance in the field.
Flexible Work Modes
– Static Measurement: Record static with 8GB storage, downloadable via web UI.
– Internal Radio Mode: Achieve up to 15km range with the built-in UHF radio for reliable field communication.
– PDA CORS Mode: Connect through Bluetooth, easily access to local CORS stations via PDA device for real-time, accurate positioning.
Survey With SingularPad
SingularPad, an Android-based professional field software, is designed to meet diverse surveying needs. Paired with the innovative Orion ONE, it’s enhanced with Wi-Fi data interaction, visual stakeout, and laser survey capabilities.
SATELLITES TRACKING
Channels: 1408
GPS: L1C/A, L1C, L2C, L2P(Y), L5
BDS: B1I, B1C, B2a, B2I, B3I
GLONASS: G1, G2, G3
Galileo: E1, E5a, E5b, E6
QZSS: L1C/A, L1C, L2C, L5
NavIC: L5
SBAS: L1C/A
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
L-Band: Support
Cold start: <30s
RTK Initialization Time: <5s(typical)
RTK initialization reliability: >99.9%
Re-acquisition: <1s
ACCURACY
Standalone:
– 1.5m Horizontally
– 2.5m Vertically
DGPS:
– 0.4m Horizontally
– 0.8m VerticallyStatic post-processing:
Static post-processing:
– 2.5mm+0.5ppm Horizontally
– 5mm+0.5ppm Vertically
RTK:
– 8mm+1ppm Horizontally
– 15mm+1ppm Vertically
PPP:
– 5 cm Horizontally
– 10 cm Vertically
SBAS: < 1.0 m 3D RMS
Time Accuracy: 20ns
Tilt surveying: < ±2.5cm, within 60° tilt range
AR Stakeout:
– 8mm+1ppm Horizontally
– 15mm+1ppm Vertically
Laser Tilt Measurement: ≤5.5cm (5m range, ≤60°tilt in Laser mode)
DATA FORMAT
Data output format:
– NMEA-0183
– RINEX 3.02/3.04
– Binary format *.xyz
Data update rate: 1～50Hz selectable
Correction data format: RTCM v3.3/3.2/3.1/3.0
Supported protocols: Ntrip client, Ntrip Server, Ntrip Caster, TCP, UDP
COMMUNICATION
UHF modem1:
– Working range: 5km – 15km2, in ideal environments
– Frequency range: 410-470MHz
– Protocol (TX & RX): LoRa
– Protocol(RX):TRIMATLK, SATEL,TRANSEOT,TRIMMARK3, etc.
– Channel spacing: 25KHz
– Transmit power: 0.5W~2W selectable
Bluetooth: BT4.0 dual mode
NFC: Support NFC connection
WiFi: 802.11 a/b/g/n/ac
Interface:
– 1 Type-C interface for data transmission and charging
– 1 SMA connector for UHF antenna
VISUAL SENSOR
Sensor type: Camera
Pixel: Global shutter with 2 MP
Frame: 30 fps
FOV: 75°
Feature: Starlight-grade camera, HD capture in weak light environment
LASER SENSOR
Range: 10m
Accuracy: (3-5)mm + 1ppm
Measuring Frequency: 2Hz
Laser Injection Power: 2mW~3mW
Laser Tilt Measurement: ≤5.5cm (5m range, ≤60°tilt in Laser mod
USER INTERACTION
Front panel:
– 3 LED indicators indicating satellite tracking, differential data transmission and power
– 1 button for power on/off
WebUI:
– Accessible via Wi-Fi
– Support configuration, status checking, data transfer, data storage and system upgrade
ELECTRICAL
Power consumption: 1.8 W3
Input voltage: DC 5-15V
Battery:
– 4200 mAh, up to 12 hours working time
– Fast charge of 3 hours charging time DATA FORMAT
PHYSICAL
Size: Φ107 mm × 58.7 mm
Weight: 547 g
Storage: 8 GB4
Housing material: Magnesium-aluminum alloy
ENVIRONMENTAL
Working temperature: -40 ℃ to + 65 ℃
Storage temperature: -55 ℃ to + 85 ℃
Humidity: 100% non-condensing
Waterproof & dustproof: IP67
Drop: Designed to survive a 2m drop onto concrete
Note:
1. The enhanced UHF base is not compatible with normal UHF rovers on the market. For different user needs, SingularXYZ also provides normal UHF as an option compatible with UHF of other brands. Please clarify your requirements when placing the order.
2. The maximum working range of the enhanced UHF modem is 15km in ideal environments.
3. The power consumption varies with the different work modes.
4. Storage can be expanded to 32GB according to user demands.
All specifications are subject to change without notice.