Receive signals from all satellite systems
One of the best and most popular receivers among surveyors is the Y1 receiver. With 1598 channels to track the entire satellite system, this receiver can provide high-precision positioning in the centimeter range. With its special tracking technology, satellite signals and advanced algorithm, the Y1 can be easily used in challenging environments and with the repeatability of the values provided, it will gain your complete trust.
OLED display
Y1 has an OLED display: Y1 has an OLED display that allows you to adjust general settings or static mode without using the controller with the capacitive buttons on the panel. It also shows you the receiver’s performance at any time.
WebUI:
از دیگر قابلیتهای Y1 میتوان به WebUI اشاره کرد که از طریق Wi-Fi به آن متصل شده و کلیه بروزرسانیهای نرمافزار و سایر تنظیمات را انجام میدهید.
6600 mAh batteries
Hot Swap Batteries: High-capacity 6600mAh hot swap batteries support over 12 hours of operation and less than 3 hours of charging time.
Flexible communications
With the integration of 4G, UHF, WiFi, Bluetooth, USB and serial port: With the integration of 4G, UHF, WiFi, Bluetooth, USB and serial port, you can flexibly choose the communication method you need. The 2W amplified UHF allows communication up to 15km, without the need for an external radio and reducing the burden on your equipment.
Field software
SingularSurv and SingularPad: Both SingularSurv and SingularPad are Android-based field surveying software that offer different surveying modes such as static, RTK, and PPK. These softwares support Base and Rover working modes, provide a variety of formats, have a simple and smooth user interface, and provide users with professional surveying methods.
Flexible communications
By integrating 4G, UHF, WiFi, Bluetooth, USB and serial port technologies:
By integrating 4G, UHF, WiFi, Bluetooth, USB and serial port technologies, you can flexibly choose the communication method you need. The 2W amplified UHF enables communication up to 15km working range, without the need for an external radio and reducing the burden on equipment.
Satellite tracking
Channels: 1598
GPS: L1, L1CA, L2 (L2P, L2c), L5, L1c
BDS: B1, B2, B3(B1I, B2I, B3I), (B1c, B2a, B2b)
GLONASS: L1 (L1CA, L1P), L2 (L2CA, L2P), L3
Galileo: E1, E5a, E5b, E6, E5 AltBoc
QZSS: L1C, L2, L5, L1C/A
Navic: L5
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
Accuracy
RTK reliability: ＞99.99%
RTK initialization: < 10s
Hot start: < 10s
Cold start: < 50s
Re-acquisition time: < 1s
Static post-processing:
– 2.5mm+0.5ppm Horizontally
– 5mm+0.5ppm Vertically
RTK:
– 8mm+1ppm Horizontally
– 15mm+1ppm Vertically
RTD:
– 0.5 m Horizontally
– 1.0m Vertically
Code differential:
– 0.25m+1ppm Horizontally
– 0.5m+1ppm Vertically
High precision long observation static accuracy:- 3mm+0.1ppm Horizontally
– 3.5mm+0.4ppm Vertically
Real time network accuracy:
– 8mm+0.5ppm Horizontally
– 15mm+0.5ppm Vertically
SBAS: < 1.0 m 3D RMS
Tilt surveying: <2.5cm, within 60° tilt
Communications
BT: BT4.0
Wi-Fi: IEEE 802.11 a/b/g/n 2.4G 5G, support configuration & data download via web UI
4G: FDD-LTE B1/B3/B5/B7/B8
TDD-LTE B38/B39/B40/B41
TDSCDMA B34/B39
WCDMA B1/B2/B5/B8
GSM B2/B3/B5/B8
CDMA1x/CDMA2000 BC0/BC1
UHF modem:
– Frequency range: 410 – 470Mhz
– Channel Spacing: 12.5 kHz
– Transmit power: 0.5W/1W/2W selectable
– Working range: Up to 15km with optimal conditions
Interface:
– 1 7-pin lemo port for RS232 transmission and power supply
– 1 SIM card slot for 4G
– 1 TNC connector for UHF antenna
Voltage
Power: 6-28V DC
Battery: 6600mAh, 3.6V, more than 12 hours working time
Power consumption: < 2.85 W*
Environmental conditions
Working temperature: -30℃ ~ + 65℃
Storage temperature: -40℃ ~ +85℃
Waterproof & dustproof: IP67
Shock and Vibration: Designed to survive a 2m drop onto concrete
Humidity: 100% no condensation
Vibration: MIL 810G
Body
Size: 12.3 × 12.3 × 7.0cm
Weight: 834 g, with batteries inside
Memory: 8 GB
Display: 0.93″ OLED display
Button: 2 buttons for power/enter and function
Indicator: 2 LEDs indicating satellite tracking and correction data
Housing: Magnesium-aluminum alloy
Speaker: For voice broadcast of real-time status
Data format
Data recording formats: RINEX 2.X, 3.X, binary data
Correction data formats: RTCM 2.x, 3.x, CMR, CMR+ (CMR & CMR+ for GPS only)
Data output formats: NMEA-0183 messages, binary data
Data output rate: 1Hz, 2Hz, 5Hz, 10Hz, 20Hz
Supported protocols: VRS, FKP, MAC, Ntrip
