تهران
021-88107001
P2 PLUS GNSS RECEIVER
Light & Wearable For GIS & Surveying
FIXED IN SECONDS
Equipped with a 1408-channel GNSS engine, P2 Plus can track GPS, BDS, GLONASS, Galileo and QZSS synchronously, ensuring consistent and reliable centimeter-level positioning even in challenging construction site conditions.
FLEXIBLE DESIGN
Designed with flexibility, the P2 Plus can be mounted on a range pole for professional land surveying, wear it on the arm or handheld for convenient GIS data collection.
EFFICIENT COMMUNICATION
With Bluetooth for easy configuration, 4G for RTK correction data transmission, Type-C interface for charging and upgrade, P2 Plus provides stable positioning for your surveying or GIS tasks.
ADVANCED SAFETY ALERTS
Prioritizing construction site safety, the P2 Plus GNSS receiver comes with a range of warning features including warning lights, voice alerts, and vibration alerts, notifying users when they entering dangerous areas, enhancing safety during construction operations.
60° TILT SURVEY
Optimized with the new generation of IMU module, you can easily initialize the IMU in just 5 seconds and start tilt measurements up to 60°. One initialization can meet the centimeter accuracy requirement for the whole work.
Handheld for GIS
Weighing less than 300 grams, the P2 GNSS receiver is an ultra-lightweight, perfect handheld device for all your GIS tasks and various positioning related applications.
LONG TIME BATTERY
Powered by a 4000mAh internal battery and optimized for low power consumption, the P2 Plus can operate continuously for up to 12 hours, ensuring uninterrupted surveying throughout the workday.
IP67 PROTECTION
Built to withstand harsh working conditions, the P2 Plus is housed in a rugged IP67 enclosure with sealed plugs, providing protection against accidental drops, shocks, inclement weather, and other potential damages.
GUARANTEE YOUR SAFETY
Prioritizing construction site safety, the P2 can alert operators when they are nearing hazardous or restricted areas by its warning lights, voice alerts, and vibration alerts. Additionally, the always-on warning light serves as a visual warning during night operations.
Survey With SingularPad
SingularPad is a professional field software that meets your versatile demands, which can be easily installed on Android devices.
SATELLITES TRACKING
Channels: 1408
GPS: L1C/A, L1C, L2C, L2P(Y), L5
BDS: B1I, B1C, B2a, B2I, B3I
GLONASS: G1, G2, G3
Galileo: E1, E5a, E5b, E6
QZSS: L1C/A, L1C, L2C, L5
NavIC: L5
SBAS: L1C/A
SBAS: WAAS, EGNOS, SDCM, BDSBAS, GAGAN
L-Band: Support
Cold start: <30s
RTK Initialization Time: <5s(typical)
RTK initialization reliability: >99.9%
Re-acquisition: <1s
ACCURACY
Standalone:
– 1.5m Horizontally
– 2.5m Vertically
DGPS:
– 0.4m Horizontally
– 0.8m VerticallyStatic post-processing:
Static post-processing:
– 2.5mm+0.5ppm Horizontally
– 5mm+0.5ppm Vertically
RTK:
– 8mm+1ppm Horizontally
– 15mm+1ppm Vertically
PPP:
– 5 cm Horizontally
– 10 cm Vertically
SBAS: < 1.0 m 3D RMS
Time Accuracy: 20ns
Tilt surveying: < ±2.5cm, within 60° tilt range
AR Stakeout:
– 8mm+1ppm Horizontally
– 15mm+1ppm Vertically
Laser Tilt Measurement: ≤5.5cm (5m range, ≤60°tilt in Laser mode)
DATA FORMAT
Data output format:
– NMEA-0183
– RINEX 3.02/3.04
– Binary format *.xyz
Data update rate: 1～50Hz selectable
Correction data format: RTCM v3.3/3.2/3.1/3.0
Supported protocols: Ntrip client, Ntrip Server, Ntrip Caster, TCP, UDP
COMMUNICATION
UHF modem1:
– Working range: 5km – 15km2, in ideal environments
– Frequency range: 410-470MHz
– Protocol (TX & RX): LoRa
– Protocol(RX):TRIMATLK, SATEL,TRANSEOT,TRIMMARK3, etc.
– Channel spacing: 25KHz
– Transmit power: 0.5W~2W selectable
Bluetooth: BT4.0 dual mode
NFC: Support NFC connection
WiFi: 802.11 a/b/g/n/ac
Interface:
– 1 Type-C interface for data transmission and charging
– 1 SMA connector for UHF antenna
VISUAL SENSOR
Sensor type: Camera
Pixel: Global shutter with 2 MP
Frame: 30 fps
FOV: 75°
Feature: Starlight-grade camera, HD capture in weak light environment
LASER SENSOR
Range: 10m
Accuracy: (3-5)mm + 1ppm
Measuring Frequency: 2Hz
Laser Injection Power: 2mW~3mW
Laser Tilt Measurement: ≤5.5cm (5m range, ≤60°tilt in Laser mod
USER INTERACTION
Front panel:
– 3 LED indicators indicating satellite tracking, differential data transmission and power
– 1 button for power on/off
WebUI:
– Accessible via Wi-Fi
– Support configuration, status checking, data transfer, data storage and system upgrade
ELECTRICAL
Power consumption: 1.8 W3
Input voltage: DC 5-15V
Battery:
– 4200 mAh, up to 12 hours working time
– Fast charge of 3 hours charging time DATA FORMAT
PHYSICAL
Size: Φ107 mm × 58.7 mm
Weight: 547 g
Storage: 8 GB4
Housing material: Magnesium-aluminum alloy
ENVIRONMENTAL
Working temperature: -40 ℃ to + 65 ℃
Storage temperature: -55 ℃ to + 85 ℃
Humidity: 100% non-condensing
Waterproof & dustproof: IP67
Drop: Designed to survive a 2m drop onto concrete
Note:
1. The enhanced UHF base is not compatible with normal UHF rovers on the market. For different user needs, SingularXYZ also provides normal UHF as an option compatible with UHF of other brands. Please clarify your requirements when placing the order.
2. The maximum working range of the enhanced UHF modem is 15km in ideal environments.
3. The power consumption varies with the different work modes.
4. Storage can be expanded to 32GB according to user demands.
All specifications are subject to change without notice.
Orion ONE GNSS Receiver | 2024-12-13 | pdf
